Henkel Adhesives

Press this button if you would like an Adhesive Technician to call you
or Contact Us via Email

Home
Green Adhesives
Ask An Expert
Hot Melts
Epoxies
Acrylic
Cyanoacrylates
Methacrylates
1 Part Adhesives
Structural
Glue Dots
Dispensers
Anaerobics
Aerosols
Encapsulants
Sealants
Sovereign
UV Adhesives
Accessories
Mixers
Mold Releases
Packaging
Tech Menu
ISO 9001:2000
Prices/Ordering
Demonstrations
Facilities
Resources
Hot Melt Hoses
Hot Melt Parts
MEDICAL
Electronics Materials
Woodworking

Adhesive
Calculation
Table(pdf)

Spanish Edition

To Home Page

Adhesive
HotLines
U.S. and Canada
1-800-323-5158
Fax
1-800-353-7770

World Wide
01-847-437-7773
Fax
01-847-437-8006

Minimum Order
$150 US
on all
Cash
Credit Card
or
Charge
orders

ENTER HERE for information on the ISO 9001:2000...The Standard for World Class Quality and how it protects our customers.


	HENKEL Cyanoacrylate Adhesives

About Henkel Cyanoacrylates

Sicomet Cyanoacrylates Product Description and Recomended Uses

Sicomet Specification Chart.

Sicomet Power Series Product Description and Recommended Uses.

Sicomet Power Series Specification Chart

"Product Purity Makes the Difference"

WHY SICOMET CYANOACRYLATES? More and more engineers and others involved in product assembly are discovering that all cyanoacrylates are not the same. Triple distilled Sicomet cyanoacrylates are purer than conventional cyanoacrylates with no measurable trace of moisture. This purity permits an almost indefinite shelf life when stored at zero degrees fahrenheit.

PRODUCT DESCRIPTION AND RECOMMENDED USE

SICOMET 85 is the standard for bonding metals to rubber as well as ceramic and ferrite materials. Resistant to many solvents and chemicals, this adhesive features a low viscosity for easy handling and is best suited for close fitting parts.

SICOMET 7000 bonds metals to themselves or other substrates. It has a medium viscosity and allows some positioning time. It is especially useful for bonding slightly dirty or oily metals, and offers better moisture resistance than most cyanoacrylates.

SICOMET 99 is a high viscosity adhesive for bonding metals where gap-filling is needed. Slow-setting, it allows maximum part positioning time. It's well suited for bonding non-ferrous metals, giving good impact and vibration resistance and thermostability.

SICOMET 40 is a wicking grade adhesive designed for bonding preassembled plastic parts. It features a very fast setting time and gives good wetting on difficult to bond plastics. It has also been useful for bonding transformer laminates.

SICOMET 5023 features a moderately slow setting speed and very low viscosity. An excellent product for post-assembly where the adhesive must penetrate deeply into the preassembled parts. This product is non-stringing and can be used in normal cyanoacrylate dispensing equipment.

SICOMET 50 is the standard for bonding plastics and offers a fast overall cure speed. It is a versatile adhesive and gives good thermal, climatic and impact resistance. This product elasticity makes it especially suitable for bonding dissimilar materials.

SICOMET 63 is a fast curing adhesive with a medium viscosity, offering exceptional adhesion to plastic parts through good wetting properties. An ideal adhesive for filling small gaps on plastic surfaces.

SICOMET 8400 is a fast curing, medium viscosity material designed for the adhesion of most plastics and elastomers. It provides excellent drop control and the ability to bridge small tolerances. An excellent material for bonding most types of porous substances, such as foam rubber.

SICOMET 77 is a fast curing, high viscosity material for plastic bonding and is suitable where high impact resistance is desired. A good general purpose adhesive providing some gap-filling, it's useful for a variety of materials such as wood, cork and leather.

SICOMET 5019 is a high viscosity adhesive with a faster setting time than most high viscosity cyanoacrylates. It offers high elasticity, giving excellent bonds to dissimilar or porous materials. The viscosity facilitates gap-filling and the high temperature resistance to 250F makes it useful in loudspeaker assembly.

SICOMET 5044 is suggested for bonding plastics or porous materials where time is needed for part positioning. This product offers high elasticity and is suitable for bonding dissimilar materials with different coefficients of thermal expansion. This adhesive provides gap-filling and optimum flow control.

SICOMET POWERGEL is an extremely high viscosity, medium fixturing, single component, industrial quality instant adhesive. Formulated to a clear gel and featuring non-stringing, non-migrating properties, it is suitable for most substrates.

SICOMET 5181 is a high viscosity black adhesive with a slow set speed. It is suitable for bonding porous substrates and materials with different coefficients of thermal expansion. The repositioning of parts and inspection of bonded assemblies is also possible.

SICOMET 8300 is the standard adhesive for bonding 0-rings and rubber materials. It features a low viscosity and fast setting time, joining hard to bond elastomers. It is highly resistant to aging, weathering and plasticizer migration.

SICOMET 9000 Methoxyethyl is a low viscosity adhesive that features no odor, non-frosting characteristics and formulated for low blooming applications.

SICOMET 9010 Methoxyethyl is a medium viscosity adhesive featuring no odor, non-frosting characteristics where cosmetically critical bonding methods are required. Eliminates the need for special ventilation.

SICOMET 9020 Methoxyethyl is a high viscosity adhesive featuring no odor, non-frosting characteristics where cosmetically critical bonding methods are required. Eliminates the need for special ventilation.
Note: Actual setting times experienced will be effected by such factors as humidity, temperature, surfaces being bonded and thickness of glue line. Certain materials such as untreated polyethylene/polypropylene, fluorocarbons and silicone rubber may present bonding problems. Long term adhesion of SICOMET cyanoacrylate to glass surfaces is limited.

Sicomet Product Specifications

Sicomet Adhesive	Ester Base	Appearance	Average Viscosity cp@ 68F	Set Time in Seconds- Metal	Set Time in Seconds- Plastic	Set Time in Seconds- Rubber	MIL Spec Mil-A-46050 c
85	Methyl	Clear	20	15-20	2-3	N/A	Type 1, Class 1
7000	Methyl	Clear	90	20-25	3-4	N/A	Type 1 Class 2
99	Methyl	Clear	2,000	30-40	4-5	N/A	Type 1 Class 3
40	Ethyl	Clear	5	10-15	2-3	1-2	Type II Class 1
5023	Ethyl	Clear	5	40-60	15-20	8-10	Type II Class 1
50	Ethyl	Clear	30	15-25	3-4	2-3	Type II Class 1
63	Ethyl	Clear	100	15-20	4-5	2-3	Type II Class 2
8400	Ethyl	Clear	210	15-20	4-5	2-3	Type II Class 2
77	Ethyl	Clear	1,100	25-35	5-6	4-6	Type II Class 3
5019	Ethyl	Clear	2,400	25-35	6-10	8-10	Type II Class 3
5044	Ethyl	Clear	3,200	25-40	10-15	8-10	Type II Class 3
65	Ethyl	Clear	20,000	50-80	15-20	12-15	Type II Class 4
Sicomet Power Gel	Ethyl	Clear	Thixotropic	30-50	20-25	12-15	Type II Class 4
5181	Ethyl	Black	2,400	80-120	30-35	30-35	N/A
8300	Ethyl	Clear	20	N/A	2-3	1-2	Type II Class 1
9000	Methoxy ethyl	Clear	15	25-35	10-15	3-5	N/A
9010	Methoxy ethyl	Clear	150	25-40	10-20	5-10	N/A
9020	Methoxy ethyl	Clear	1100	25-40	10-20	5-10	N/A

POWER SERIES

The Sicomet Power Series encompasses a wide range of cyanoacrylate products which cure very rapidly with superior bonding strength and better resistance to high temperatures, improved elasticity, impact resistance, aging and weathering.

Sicomet Power Series Description and Recommended Use
F-15 Sicomet F-15 is a wicking grade cyanoacrylate with a fast cure speed. This adhesive contains new technology that gives quick curing on surfaces which retard the curing of regular cyanoacrylates. Sicomet F-15 offers superior performance on materials such as wood, plastic composites or plated metals.

S-75 Sicomet S-75 is fast curing adhesive with a medium viscosity. It features special chemistry to cure quickly on surfaces which retard the curing of regular cyanoacrylates. Unique wetting agents in this product give superior adhesion to plastics that may be contaminated with mold release or are difficult to bond. Sicomet S-75 fills moderate gaps and bonds metal, rubber and plastics.

T-500 Sicomet T-500 is a modified cyanoacrylate adhesive with a medium viscosity. The unique chemistry of Sicomet T-500 gives better shock and vibration resistance than regular cyanoacrylate adhesives while still offering a fast set speed. In addition, it provides exceptional flexibility and thermal cycling resistance compared to standard cyanoacrylates. The viscosity of Sicomet T-500 makes it especially suitable for bonding porous materials such as foam rubber or impregnated cloth. This product also gives reliable bonds to metal, rubber and plastic materials.

T-1500 Sicomet T-1500 is a modified cyanoacrylate adhesive with a medium to high viscosity. The unique chemistry of Sicomet T-1500 gives it better shock vibration resistance than regular cyanoacrylate adhesives. In addition, it provides exceptional flexibility and thermal cycling resistance compared to standard cyanoacrylates. The viscosity of Sicomet T-1500 makes it especially suitable for bonding porous materials such as foam rubber or impregnated cloth. This product also gives reliable bonds to metal, rubber and plastic materials.

T-5000 Sicomet T-5000 is a unique cyanoacrylate adhesive with a high viscosity. The unique chemistry of Sicomet T-5000 gives it unsurpassed shock resistance, as well as, exceptional thermal cycling resistance, when compared to standard cyanoacrylates. The viscosity of Sicomet T-5000 makes it especially suitable for bonding porous materials or for giving maximum gap-filling ability. This product gives reliable bonds to metal, rubber and plastic materials.

S- 1000 Sicomet S-1000 is a modified cyanoacrylate adhesive with a medium viscosity. It contains special chemistry to cure quickly on surfaces which retard the curing of regular cyanoacrylates. Unique wetting agents in Sicomet S-1000 give superior strength adhesion to plastics that may be contaminated with mold release or are difficult to bond. The adhesive also offers superb shock and thermal cycling resistance. Sicomet S- 1000 fills gaps up to 20 mils and bonds metal, rubber and plastics.

S-3000 Sicomet S-3000 is a modified cyanoacrylate adhesive with a high viscosity. It contains special chemistry to cure quickly on surfaces which retard the curing of regular cyanoacrylates. Unique wetting agents in Sicomet S-3000 give superior adhesion to plastics that may be contaminated with mold release or are difficult to bond. The adhesive also offers superb shock and thermal cycling resistance. Sicomet S-3000 will fill gaps up to 50 mils with the use of Fastac Accelerator and bonds metal, rubber and plastics.


	Sicomet Power Series Product Specifications

Sicomet Power Series	Ester Base	Appearance	Ave. Viscosity cp@68F	Set Time seconds-Metal	Set Time Seconds-Pla stic	Set Time Seconds Rubber	Mil Spec MIL-A-46050C
F-15	Ethyl	Clear	15	8-10	2-3	1-2	Type II Class 1
S-75	Ethyl	Clear	75	10-15	3-5	1-2	Type II Class 2
T-500	Ethyl	Clear	500	12-15	5-7	3-4	Type II Class 3
T-1500	Ethyl	Clear	1500	20-25	4-6	4-5	Type II Class 3
T-5000	Ethyl	Clear	5000	30-35	10-12	7-8	Type II Class 4
S-1000	Ethyl	Clear	1000	15-20	4-5	4-5	Type II Class 3
S-3000	Ethyl	Clear	3000	25-30	8-10	5-6	Type II Class 3