|
 Press
this button if you would like an Adhesive Technician to call you
or
Contact Us via Email
Adhesive
Calculation
Table(pdf)
| |
BONDING
LOCTITE ACRYLIC ADHESIVES
Click on photo for large view
Loctite Adhesives were developed for
structural bonding applications that require tensile, shear and peal strength
combined with maximum impact, stress, and shock resistance.
Henkel's Loctite
Indigo™
Visible Light Cure Acrylic
Adhesive and Equipment Solutions>
Enter (Click) here for more information!
 | Two-Step No Mix Structural
Acrylics |
| Two-Part Structural Acrylics |
| Loctite Magnet Bonding |
| Loctite 3030 Two
component,thixotropic acrylic adhesive.
|
| Plastic
and Composite Bonders Properties Chart |
| Metal Bonder
Properties Charts |
| Low Odor/Non-Flammable
Properties Chart
TWO-STEP NO MIX ACRYLICS
when in contact with a liquid activator, these
no mix materials cure rapidly at room temperature to a weather-resistance
bond. Ideal for close fitting parts where extended open time is required.
324 High Impact Speedbonder- Ideal
for large gap applications. A structural adhesive that offers strength of an
epoxy and the speed of an instant adhesive. Solvent resistant. Cures in
minutes. Specially formulated for toughness and impact strength.
325 High Temperature Speedbonder-Solvent
resistant, activator -cured in minutes. Forms flexible bonds on gaps up to
0.40". Designed for severe environments and temperatures at 350F
326 Fast Fixture Speedbonder-An
all-purpose bonder. A structural adhesive that offers strength of an epoxy and
the speed of an instant adhesive. Solvent resistant. Cures in minutes. Ideal
for applications requiring fast fixturing.
330 Depend No-Mix Adhesive-
A no-mix high viscpsity adhesive for a wide range of materials including
metal, wood, ferrite, ceramic, and plastic.
332 Structural Adhesive
Severe Environment-An
activator-cured, no -mix adhesive that provides high temperature capability
with thermal durability to 350F
384 Output
Repairable
Thermally Conductive-Mounts
components to heat sinks but allows removable or repair or replacement. Output
Activator is required for curing.
 TWO-PART
STRUCTURAL ACRYLICS when statically
mixed, these adhesives develop a tough, durable bond to a wide variety of
substrates, including metals, plastics and composites. Loctite two-part
structural acrylics are available in mixer-friendly packaging to minimize
waste and process time. Refer to the dispensing
section for available dual cartridge dispensers and mix nozzles.
H3000 Speedbonder General Purpose
A low viscosity general purpose
adhesive ideal for bonding plastics and composites.
H3300 Speedbonder General Purpose,
Fast Fixture A non -sag, fast , fast
fixturing structural adhesive for bonding plastics and composites.
H3151 Speedbonder Metal Bonder
Extended open time allows for adjustment of parts. Excellent bond strength on
aluminum and steel. Impact and peel resistant.
H4100 Speedbonder Ultra Fast
Ultra fast fixturing structural adhesive. Forms strong bonds to plastics and
composites.
H4200 Speedbonder
Toughened A general purpose plastic and composite bonder with high peel and
impact resistance. Fixtures in 15 minutes.
H4500 Speedbonder Metal Bonder
High strength structural adhesive for metals. Fixtures in 10 minutes.
H4800 Speedbonder Toughened
Provides extended open time, making it ideal for the assembly and adjustment
of large parts. Excellent peel and impact resistance. High bond strengths on
composites.
3410 Speedbonder Low Odor/Non
Flammable A fast setting, non-sag
gel structural adhesive with minimal odor. Acid free. Fixtures in 10 minutes.
3411 Speedbonder Metal Bonder
A medium setting, non-sag gel structural adhesive with minimal odor. Acid
free. Fixtures in 15 minutes.
H3412 Speedbonder Low
Odor/Non-Flammable. A general
purpose structural adhesive. Good for light impact and light peel
applications.
3413 Speedbonder Low
Odor/Non-Flammable. A low odor, slow
setting non-sag gel structural adhesive. Fixtures in 120 minutes. Ideal for
bonding larfe parts that require adjustment time.
3414 Speedbonder metal Bonder
This toughened, non-sag gel adhesive provides excellent bond strength on
aluminum. Excellent peel strength.
Properties
Charts-Click on tables to view
Plastic and
Composite Bonders
Metal Bonder
Low Odor/Non-Flammable
LOCTITE 3030
LOCTITE® Product 3030 is a fast curing, two
component,thixotropic acrylic adhesive.
It is designed primarily to bond to many low energy substrates such as
poly(ethylene)
and poly(propylene) but can be used as a general purpose adhesive on may other
substrates as well.
TYPICAL APPLICATIONS
Product 3030 is designed for bonding to difficult substrates,
such as HDPE, LLDPE, and polypropylene. The product offers good resistance to
many chemicals.
For more information, pricing, ordering-Call
1-800-323-5158 or Email
Product 3030 Data Sheet
3030 Material Safety Data
Sheet Part A
3030Material Safety Data Sheet
Part B
|
|
Glu
Guru™ Tech Center 1850 South
Elmhurst Road Mount Prospect, Il 60056
