| Product No |
Description | Color | Mix Ratio (Vol) |
Viscosity of components (cp) |
Gap Fill (Inches) |
Open Time (Min) |
Fixture Time (Min) |
Tensile Strength (psi) |
Tensile Elongation (2?) |
Peel Strength (pli) |
Tensile Lap Shear @77F | Tensile Lap Shear @180F |
| H3000 | General purpose, Low-med viscosity,ideal for static joints | Tan | 1:1 | PartA-90,000 Part B-70,000 |
.005-.375 | 4-6 | 15-20 | 4100-4300 | 20-30 | 30 | 4100-4300 | 1900-2100 |
| H3100 | General purpose, non-sagging gel, superior impact and peel strength | Cream | 1:1 | PartA-90,000 PartB-70,000 |
.005-.375 | 8-12 | 15-20 | 3000-3200 | 30-40 | 50 | 4200-4500 | 2800-3000 |
| H3300 | General purpose, non-sagging gel, ideal for staic joints | Yellow | 1:1 | PartA-145,000 PartB-80,000 |
.005-.375 | 4-6 | 10-15 | 4100-430 | 20-30 | 30 | 4100-4300 | 1900-2100 |
| H4000 | Fast setting, Semi-flexible composite bonder, superioresistancer fatigue | Pale Yellow | 10:1 | PartA-90,000 PartB-170,000 |
.005-.500 | 7-10 | 15-20 | 2700-2900 | 30-40 | 45 | 3700-4000 | 2700-2900 |
| H4100 | Rapid curing, non-sag gel. Fatigue applications | Pale Yellow or Black | 10:1 | PartA-90,000 PartB-140,000 |
.005-.375 | 2-4 | 7-8 | 4100-4300 | 20-30 | 45 | 4000-4200 | 2300-2500 |
| H4200 | General Purpose, Medium
setting, flexible, low- med viscosity |
Pale Yellow | 10:1 | PartA-90,000 PartB-40,000 |
.005-.375 | 4-6 | 15-20 | 2500-2700 | 40-50 | 40 | 3700-3900 | 1900-2100 |
| H4300 | General purpose, Non-sagging gel, medium setting,flexible | Ligh Yellow | 10:1 | PartA-150,00 PartB-40,000 |
.005-.375 | 4-6 | 15-20 | 2500-2700 | 40-50 | 40 | 4200-4400 | 1900-2100 |
| H4400 | General purpose, rapid curing, low viscosity, self leveling | Pale Yellow | 10:1 | PartA-35,000 PartB-40,000 |
.005-.375 | 4-6 | 15-20 | 1900-2100 | 20-30 | 40 | 3900-4100 | 1600-1800 |
| H4500 | Metal bonder with internal primer for SS Al and Steel | Pale Yellow | 10:1 | PartA-25,000 PartB-35,000 |
.005-.500 | 4-6 | 15-20 | 3400-3600 | 20-30 | 60 | 3800-4500 | 2000-26000 |
| H4800 | Long open time, semi-flexible composites bonder, fatigue applications | Light Yellow | 10:1 | PartA60,000 PartB-50,000 |
.005-1.00 | 20-25 | 45-55 | 3400-3600 | 23-35 | 60 | 4500-4700 | 2800-3000 |
| H6000 | Designed specifically for secondary bonding of gel coat, non-sagging, minimum surface preparation | White | 10:1 | PartA-80,000 PartB-30,000 |
.005-.500 | 15-25 | 40-60 | 1100-1300 | 45-55 | 32 | 3000-3200 | 200-2500 |
| Primer 2000 |
Recommended for all applications with metal susstrates to increase bond strength & environmental resistance | - | - | - | - | - | - | - | - | - | - | - |
DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties are
expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible for assuring
that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate.
Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate engineering
controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request.
For
more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email
mike@on-hand.com