|
 Press
this button if you would like an Adhesive Technician to call you
or
Contact Us via Email
Adhesive
Calculation
Table(pdf)
| |
Ad-Tech Hot Melts
Bostik Hot Melts
Loctite-Hysol Hot Melts
Hot Melt Spray-Pac Adhesives
Hot Melt Pellets and Chips
To Hot Melt Dispensing Applicators
Order Hot Melt Adhesives and Dispenser
Direct at Hot Melt Prices
HOT MELT ADHESIVES-ORDER DIRECT AT
FACTORY PRICES
You don't have to pay full price for your Hot Melt Glue Guns and Hot Melt
Adhesives. Order direct by going to:
HOT MELT DIRECT.COM where, ON LINE
you can order top quality brand name hot melts and dispensers at factory direct
prices.
SUPERIOR QUALITY-COST
SAVINGS-IMMEDIATE DELIVERY-
Hot Melt Direct.com offers a wide and
complete selection of Brand Names Hot Melt Adhesives and Dispensers
|
LOCTITE-HYSOL HOT MELT ADHESIVES...
The Hysol
total adhesive system offers numerous benefits. For starters, hot melts require no
energy for drying or mixing. They set quickly, with open times ranging from 5 seconds
to 8 minutes, which eliminates the need for clamps or fixtures. You'll see long term
durability and resistance to moisture, chemicals, oils, and temperature extremes.
Our adhesives are non-toxic and 100% usable, which reduces
waste disposal and worker safety concerns, unlike solvent and water-based adhesives.
Look to the Glu Guru™ for your assembly needs. When it comes to production speed,
versatility, and safety, your Glu Guru™ is the answer.
Glu Guru™ Hot Melts are designed to fit commercially
available handheld and bulk applicators. The shaped adhesives for portable hot melt
guns are cast or extruded to exacting tolerances for extra smooth, reliable feed. All
Hysol shaped hot melt formulations are also available in bulk configurations
Loctite-Hysol Hot Melt Formulas and Typical Application |
|
Polyolefins (EVA) |
Softenin g Point F |
Viscosity Centipoise
@350F |
Working Time Seconds |
Heat Resistance
F/2PSI Load |
Typical Applications |
|
|
QuickPacTM
WaxPacTM |
224
226 |
3,000
2,700 |
10
30 |
174
150 |
Carton Closing
Sealing Wax Coated Cartons |
|
CoolMeltTM |
208 |
7,200 |
30 |
140 |
Paper,Styrofoam,Plastics, Softwood |
|
SuperPacTM |
208 |
4,900 |
30 |
144 |
Carton Closing, Foam |
|
Polyolefins (EVA) |
Softenin g Point F |
Viscosity Centipoise
@350F |
Working Time Seconds |
Heat Resistance
F/2PSI Load |
Typical Applications |
|
1X |
216 |
2,000 |
15 |
150 |
Wood, Paper, Foam |
|
3X |
209 |
4,300 |
60 |
135 |
Sand Cores, Porous |
|
232 |
188 |
11,000 |
15 |
153 |
Clear General
Purpose |
|
236 |
180 |
8,500 |
25 |
140 |
Clear General
Purpose |
|
740 |
206 |
8,000 |
10 |
168 |
Paper, Fabrics |
|
740LV |
206 |
3,500 |
10 |
155 |
Paper, Fabrics |
|
Polyolefins (EVA) |
Softenin g Point F |
Viscosity Centipoise
@350F |
Working Time Seconds |
Heat Resistance
F/2PSI Load |
Typical Applications |
|
1942 |
198 |
4,000 |
30 |
142 |
Best general
Purpose, Plastics |
|
2000 |
189 |
500 |
15 |
140 |
Ceramic, Porcelain |
|
4046 |
193 |
18,000 |
60 |
120 |
Rubber, Plastics |
|
6009 |
315 |
3,000 |
25 |
300 |
Polypropylene |
|
Polyamides |
Softenin g Point F |
Viscosity Centipoise
@400F |
Working Time Seconds |
Heat Resistance
F/2PSI Load |
Typical Applications |
|
7390 |
380 |
5,500 |
5 |
330 |
Paper, Potting |
|
7802 |
280 |
6,500 |
20 |
245 |
General Purpose-High
Strength |
|
7804 |
280 |
2,600 |
35 |
220 |
General Purpose-Low
Temp.Flexibility |
|
7804FRM-H V |
280 |
3,500 |
30 |
220 |
UL94V-0 Fire
Retardant |
|
7810 |
275 |
1,500 |
35 |
215 |
Wood |
|
7811 |
310 |
4,000 |
35 |
266 |
General Purpose-High
Strength-Low Temp |
|
7815LV |
345 |
1,000 |
20 |
330 |
Potting,
Encapsulating |
|
7901 |
340 |
800 |
35 |
300 |
Potting,
Encapsulating |
Enter Here for BOSTIK HOT MELT FORMULAS
LOCTITE-HYSOL HOT MELT SPRAYPACTM
ADHESIVES
|
SPRAYPACT
M |
Softening Point F |
Viscosity Centipoise |
Working Time |
Heat Resistance
F/2PSI Load |
Typical Applications |
|
0420 (EVA) |
208 |
10,500 |
2 Minutes |
153 |
Paper, Foam, Fabric |
|
0430 (EVA) |
240 |
4,000 |
3.5 Minutes |
170 |
General Purpose-
Plastics, Wood, Foam |
|
0450 (EVA) |
232 |
4,500 |
8 Minutes |
156 |
Urethane Foam |
|
7460 Polyamides |
275 |
6,700 |
30 Seconds |
210 |
Urethane Foam |
|
7480 Polyamides |
250 |
3,900 |
50 Seconds |
211 |
General Purpose |
BULK HOT MELTS
|
Part No
Bulk Hot Melt Description
SP101 Fast Packaging Hot Melt in Chip Form-Low
Char-Premium Grade. 40 lbs per Case
SP109 General Purpose Packaging for Wax Coated
Cartons. 40lbs per case
SP630 General Purpose Sprayable Hot melt. Can
be Sprayed, Rolled or Extruded. 45lbs/Case
SP636 Pressure Sensitive Assembly Hot Melt.
General Purpose; High Temp. Resistant. 45/Case
|
|
Glu
Guru™ Tech Center 1850 South
Elmhurst Road Mount Prospect, Il 60056
